Topkidsplay is top for quality. Quality means doing it right–Right equipment in right place. Moreover, Safety should be the top priority in any business. High end playground equipment quality that meets all international safety standards is very important to make the business success.
Topkidsplay equipment is built from high quality materials and component specifications so that it meets or exceeds all relevant safety standards . Careful details mean a better play experience and long lifetime. We use the third party testing labs approved by the U.S. Consumer Products Safety Commission to provide different testings.
Most indoor playground equipments although look very similar can be cheap quality among different manufacturers. Topkidsplay use the highest standard materials and follow a strict manufacturing process. Topkidsplay only sell safe, durable and well-designed indoor playgrounds.
(1) Steel pipes
Not all steel pipes are strong. Topkidsplay use thickness from 2.0mm-3.25mm for the steel pipes. Topkidsplay can write the specifications in the sales contract and can be verified by our customers when they check our equipment.
Topkidsplay steel pipes are hot-dip galvanized where the whole pipe is soaked in a bath of molten zinc so the pipes are protected from rusty. In comparison, some companies use a cheaper process such as “electroplated coatings”, such steel is not real galvanized steel, those pipes are easily to be rusted.
Topkidsplay make own mould for clamps. They are made of galvanized steel with powder-coating to prevent from rusting. You can test the quality of the clamps with a heavy hammer. You will find the differences between Topkidsplay and low quality clamps.
Topkidsplay platforms made by wood with thickness 20mm,covered by 50mm foam which complied with GB 6675-2003 standard. In comparison, the platforms of some other manufacturers might be only around 30mm.
Topkidsplay platforms are completely wrapped in EPE foam and sponge covered with the PVC tarpaulin. So the platforms are soft and safe enough.
(4) Foam noodles
Not all foam noodles are durable and fire resistant. The foam noodles with high density EPE material with glossy bright PVC vinyl. The PVC vinyl is UV-resistant even in sunlight to be durable and stronger. Topkidsplay has foam noodles in fire resistance to match ASTM standards.
(1) Galvanized steel frames with powder coating
We do not just match the best manufacturing standards in the world – we exceed it. Topkidsplay trampoline frames are made from 80mm x 80mm tubes with 4mm thickness. With Dutch Akzo powder in sand blasting technology, the colors are more durable, more adhesive force and safer to play. Topkidsplay have powder coating machines for various colors to choose.
The essence of a Trampoline Park is the quality of the bounce. Not only do the springs have to be made from the best quality steel but also they must be the right length to match the trampoline park. Topkidsplay springs are made of piano wire. Non-deformability and tensile elongation is 5 times better than manganese steel.
(3) Trampoline pads
Topkidsplay adopt soft pads made of 0.45mm-0.55mm thickness PVC skin with 120N.M tension horizontally,vertically and eco-friendly EPE . Thickness is 70 mm. The pads are cut trapezoidally to ensure safety for users.
(4) Jumpinig mat
The trampoline mats also make a difference to the quality of the bounce. We offer both the economically-priced black tarp mats and the woven string mats as used by the professionals. Topkidsplay jumping mat is imported from USA. It comply with ASTM standard.
Our truss frames are made of high quality aluminum. They’re much lighter than steel truss, and better elasticity and toughness than steel. If steel truss, it’s too heavy to be installed.
Clamps are the soul of ninja course same as spring of the Trampoline Park, and here’re 2 typed: swivel clamps (connecting truss structure with cross bars) and eye bolt clamps (connecting cross bars with obstacles).
Topkidsplay clamps passed TUV test, and it can load 500 KGS.
The chains Topkidsplay used are coated. To be honest, at the beginning, we also use chains without coated like other suppliers, but when we made test installation, we found that it was easily for kids to get hurt their fingers. And then we change it to coated ones now.
As for the obstacles connection, what we used is one obstacle per pipe, while others used are chains or all obstacles in one pipe. It’s much more stable and durable for our ninja warrior course structure.
To know more about quality, you can click projects we did before!
Topkidsplay is a member of IAAPA (International Association of Amusement Parks and Attractions). Topkidsplay is confident that we can bring your best value in your indoor playground.
Contact Topkidsplay Our dedicated representatives will help you find the customized indoor play to exceed your expectations.